Einleitung
-
-
Use 3/8 wrench to hold the bolt in place. Now use the flat head screw driver to unscrew the screw.
-
Twist counterclockwise with flathead screwdriver.
-
-
-
Insert your new needle and seat. Twist clockwise until about half the threads are in the carburetor.
-
-
-
To reassemble, go in reverse order from step 10.
-
To replace screws that were removed, twist clockwise until the screws have a tight hold.
-
-
-
Once everything is reassembled, turn on the car.
-
If the car is making a high pitched idling noise, you may need to adjust needle and seat tighten (clockwise) to reduce rpm and loosen (counterclockwise) to increase.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
