1997-2001 Toyota Camry Headlight Bulb Replacement

Geschrieben von: Chris Opperwall
  • Kommentare: 1
1997-2001 Toyota Camry Headlight Bulb Replacement

Schwierigkeitsgrad

Easy

Schritte

7

Zeitaufwand

5 Minuten

Einleitung

  1. ReJQgxhkHbkjrayB

    • Prop up your hood.

    • Make sure you prop your hood up with your hood prop rod.

  2. Vl4pOmBvIC1mFIYe

    • Locate the back of the headlight you plan to replace the bulb in.

    • This will be directly behind the headlight assembly.

    • If you are replacing your left headlight, you may need to remove the battery to have enough room to do this replacement.

  3. 3lc5GeHqOK2qykBt

    • Disconnect the headlight.

  4. Q5NAMwGXSlTfkUvk

    • Remove the rubber cover by pulling on the tab marked "Pull Top" away from you.

  5. LCYDJHMZ3BQuCcJ4
    LCYDJHMZ3BQuCcJ4
    MdSxyrmGTqOEDchw

    • Release the bulb by pushing the metal fastener inward and then moving it upwards.

  6. KCbumGjQRrSt16cd

    • Remove the bulb.

  7. OLhrhGFR1NEkFMTU

    • Insert the new bulb. Make sure the metal tabs fit correctly.

    • I've read that touching the glass on the bulb can shorten the life of the bulb, so try not to do that.

Abschluss

To finish your headlight bulb replacement, follow these instructions in reverse order.

Tinte & Feder

Chris Opperwall

Mitglied seit: 04/04/13

1352 Reputation

Ein Kommentar

The 2000 and 2001 Camry models take 9006 (HB4) bulbs for the low beams and 9005 (HB3) bulbs for the high beams, rather than the 9003 (HB2) linked here -- at least for the North American models I've looked up.

If you have the original owner's manual that came with the car, there's a table of all the bulb types you'll need for different lights in the "Do-It-Yourself Maintenance" section. It doesn't hurt to double check.

rakslice -