2006 Iron Horse Warrior Tube Replacement

Geschrieben von: Jose Pedro Kitajima Borges
  • Kommentare: 0
2006 Iron Horse Warrior Tube Replacement

Schwierigkeitsgrad

Easy

Schritte

10

Zeitaufwand

15 - 30 Minuten

Einleitung

This guide puts the bike on a stand to replace its tube. However, you can turn the bike upside down and follow the same steps if you do not have a stand.

Werkzeuge

  1. CdBWeYFSqT12avvG
    CdBWeYFSqT12avvG
    G4QGdPlWLeqQScYI

    • Turn the bike upside down if you don't have a bike stand. This will make it easier to remove the tire.

    • Unfasten the left side of the wheel by pulling the black "L" shaped lever up with your hands.

  2. jWTlsBYPeYGu5Ch6
    jWTlsBYPeYGu5Ch6
    TWQgXZeEjojCtSxv

    • On the right side, use your hands to unscrew the cap of the axle counterclockwise until it is loose.

  3. 2Kn1ZpWtRL6TNHWF
    2Kn1ZpWtRL6TNHWF
    RPgFoFkIsJGpK2PF

    • Push down on the the tire with your hands to remove it from the frame of the bike.

    • Sometimes the axle will get caught in the boxed area. Use both of your hands to cautiously push it down harder until the tire comes loose. This may require a fair amount of force.

  4. gOWfacCE1YBJFhMo
    gOWfacCE1YBJFhMo
    Ycu1eTGUYU5EmWbE
    JlsAcZr2Y2fCnEmq

    • Slightly loosen the valve bolt counterclockwise with your thumb and index finger.

    • Deflate the tire by pressing down the air valve tip with your finger. Use as much pressure as needed to hear the air flowing out of the tube.

  5. vZAOB5QBvwLOGtUl
    vZAOB5QBvwLOGtUl
    ADbG5xFUcJN1nKQH
    dDJPIvtrmxBqs1Qn

    • Use you thumb and index finger to unscrew the valve nut by rotating it counterclockwise.

  6. XNHUudcaGqpvVjhK
    XNHUudcaGqpvVjhK
    vGX1ILpOeYtGjVKn
    tR2JhsNfWaJpZVrr

    • Hold the tire lever firmly in your hands and look for the boundary between the tire and the wheel rim. Apply great force to the lever until you pry the rim and the tire apart.

    • You can do this step anywhere along the circumference of the wheel.

    • With the tip of the lever inserted between the rim and the tire, rotate the lever 90° counterclockwise and fix the lever to the metal spokes using the arrow shaped slot located on the top of the lever.

  7. ZVaZiUlBEyNqLPOQ
    ZVaZiUlBEyNqLPOQ
    g6HUERwlRxTGFqrK

    • Insert an extra tire lever between the tire and the rim.

    • Move the lever along the circumference of the rim to pry the tire apart.

    • You may attach as many tire levers on the spokes as you feel necessary to make this step easier.

  8. OXtFeLFK2raprBsn
    OXtFeLFK2raprBsn
    VQtSg1mXRCQWkvqW
    SpAPQpK1XhWVb3Oq

    • Start removing the tire by unplugging the valve from the rim slot.

    • Remove the rest of the tire and the tube from the rim.

  9. Ab1YSITpDPS1nUCN
    Ab1YSITpDPS1nUCN
    D3o51SbeHxAWjuBv
    i6KSXdIYXQjeISGX

    • Insert the new tube inside the tire.

    • Place the tire back on the rim by inserting the valve into its slot first.

    • Use your thumb to press the tire's side until its entire circumference is placed inside the rim.

  10. dAyP63tcxHD1v1IZ

    • Inflate the tire.

Tinte & Feder

Jose Pedro Kitajima Borges

Mitglied seit: 21/04/15

254 Reputation

0 Kommentare