Einleitung

This guide will show you how to replace the battery in a 2008 Toyota Corolla. To get started, ensure the vehicle is parked in a safe place and turned off. Place the vehicle in park and engage the parking brake. Be sure to prepare baking soda mixed with water to clean the terminals.

  1. XATSDe1HfVOS1PNh
    XATSDe1HfVOS1PNh
    WtXDNfREYYynoqYA
    • Open the car hood.

    • The battery will be located on the bottom right.

  2. VHRhVmXIolV1SBpX
    VHRhVmXIolV1SBpX
    yNCdsLDfMNYxcduU
    • There are two terminals on the battery. The positive terminal is on the left with the red cover. The negative terminal is on the right.

    • Unscrew the bolt to loosen the negative terminal.

    • Remove the negative terminal from the battery.

  3. VZVaWuCFhWqcGINO
    VZVaWuCFhWqcGINO
    QehxXyBSCnOxSILb
    • Take the red cover off the positive terminal.

    • Unscrew the bolt to remove the positive terminal.

    • Loosening the screws of the terminal can be difficult. In the first picture, I used pliers to help loosen up the screw holding the terminal tight.

  4. XifF2LIhZ35ALvsP
    XifF2LIhZ35ALvsP
    aYFAtWh1xBxWcCG6
    t65A43VG3pKvPFFP
    • Disconnect the battery's terminals from the battery, and remove the old battery.

    • Batteries, over time, tend to get dirty. You can mix baking soda with water and use a brush to clean your terminals.

  5. aOlpl2l2nLNE5UPL
    aOlpl2l2nLNE5UPL
    npcFwXbdcLDk6PqJ
    MZROWSdXXYwK3Bqk
    • Once everything is clean, you can begin installing your new battery.

    • Install your new battery in the correct space. You will install the negative terminal first, then the positive terminal.

    • Before moving on, make sure each screw on the terminal is tight and secured.

  6. tKIYEQuMmAOVjeNC
    • Ensure that every bolt is secured.

    • Start your car and let your car run for a couple of minutes.

Lair Noriega

Mitglied seit: 05/04/22

165 Reputation

0 Kommentare