2011-2017 Hyundai Accent Brake Light Replacement

Geschrieben von: Brianna Pegues
  • Kommentare: 0
2011-2017 Hyundai Accent Brake Light Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

20 - 25 Minuten

Einleitung

If your 2013 Hyundai Accent brake light is no longer working, use this guide to replace the light.

The brake light alerts other drivers of whether you are slowing down or stopping the vehicle. It is important to ensure that you have a working brake light because it is a ticketable offense and for safety reasons.

Before using this guide, make sure to turn the car off and to purchase a replacement bulb (Model: Sylvania 2357LL).

  1. pbSuYkbAfwnQHi5e

    • Open the trunk of the vehicle.

  2. asMA6JQfLaEnMX51
    asMA6JQfLaEnMX51
    mFHJSJVtnAGSSA5p
    FjTnZsShsIAZFGDV

    • View the side flap for whichever side has the dead bulb. (This is the left side view.)

    • Pull the flap up and locate the brake light.

    • The flap may need some extra force to open because the cutouts are typically not cut all the way through.

  3. fIaVRPsGKlLVeYSm
    fIaVRPsGKlLVeYSm
    FvSCVCDCJHYhGnva

    • Twist the socket counterclockwise to gain access to the brake light.

  4. BQHUtB1qK1UPOnZK
    BQHUtB1qK1UPOnZK
    rVovEUamyQvRrmZU

    • Push down slightly and twist the bulb counterclockwise to remove the dead bulb.

    • Pay attention to the protrusions located on the bottom of the bulb. You will need to align these protrusions with the socket when inserting the new bulb.

  5. i2pL4Wr2OOxVhRmN
    i2pL4Wr2OOxVhRmN
    xXRojvHUdMShWPbD

    • Insert the new bulb into the socket and twist the bulb clockwise to secure it into place.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Brianna Pegues

Mitglied seit: 05/03/21

202 Reputation

0 Kommentare