Einleitung

  1. NVNiwCgGlDEbAYrH
    • Begin by opening the hood of the car and locating the battery on the front of the driver side in the engine compartment

  2. HQjvfihEqlGDJbGA
    • Using a socket wrench, loosen the 2 (5/16 inch) nuts on the top of the battery support bracket

    • Remove the bracket by lifting up

  3. xbf13PCDAUGRfpVM
    • After removing the bracket, locate the supporting rod behind the battery

    • The rod is hooked on a hole in the metal behind the battery. Unhook the rod and remove it

  4. 5K3uVqGWUUycJ6iY
    5K3uVqGWUUycJ6iY
    DBesAjJkYXpWmWwG
    • Start with the negative terminal of the battery

    • Loosen the nut on the negative terminal with a 10mm socket wrench

    • Remove the wire by slightly twisting and pulling up

  5. etK3CfKWruBKmHsQ
    etK3CfKWruBKmHsQ
    ffdstWODTAE36soD
    • Remove the cap from the positive terminal of the battery

    • Using a 10mm socket wrench, loosen the nut on the positive terminal

    • Remove the wire from the positive terminal by slightly twisting and pulling up

    • Remove the battery by lifting it out of the engine compartment

Abschluss

To reassemble your device, follow these instructions in reverse order.

Travis Michael

Mitglied seit: 08/05/15

140 Reputation

0 Kommentare