Einleitung

Use this guide to replace a broken 2004-2013 BMW 3 Series windshield wiper. This guide will assist you in achieving your task in a straightforward and proper manner. To avoid damage, make sure you follow each step precisely for the best results. This repair procedure does not require the use of any specific tools or skills.

  1. UEYYQgWrYFQGsQS3
    UEYYQgWrYFQGsQS3
    qCHrFmNASJoDPNCy
    • To begin, open the hood and make sure the broken wiper's body is completely positioned on the hood.

    • This is done to prevent scratches from developing throughout the repair process.

  2. ZS22dE2K4nBhMFVg
    ZS22dE2K4nBhMFVg
    hr1uY2roiGTnFKX3
    • Use your fingers to pop the cover off that holds the wiper in place.

  3. lFiuEyaeRxinYuYT
    lFiuEyaeRxinYuYT
    MwuS6FmrU1QHnYin
    • Use a back and forth motion to carefully remove the wiper blade from the wiper arm. and then pull it out.

  4. VYJeXPxgIJiS5bB4
    VYJeXPxgIJiS5bB4
    UVlRyxvJbllgNOsr
    • Install the replacement wiper so that the slightly bent angle side faces the vehicle.

  5. VedYeTtEpGbsOS1w
    VedYeTtEpGbsOS1w
    qqtXZVHOoGTQiOZF
    • Check that the screw is aligned with the hole.

    • With a little pressure, slowly slide the new wiper into place.

  6. YNTFhAGiXpE6q1mU
    YNTFhAGiXpE6q1mU
    sbXnHkXmHV1n6nUc
    • Once it is positioned correctly, lock the cover to keep the blade in place.

    • If you hear a click, you will know you have succeeded.

    • Lower the windshield wiper carefully onto the windshield.

  7. WIHKeFSwV1CuWUuu
    • Finally, test your wiper blades by spraying water or windshield wiper cleaner over your windshield and turning on the wipers.

    • You are done if they are wiping properly. If they appear to be loose, make sure they are securely attached before driving again.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Hafsa Yusuf

Mitglied seit: 14/09/21

145 Reputation

0 Kommentare