2016 Nissan Altima Key Fob Battery Replacement

Geschrieben von: Giovanni Avalos
  • Kommentare: 0
2016 Nissan Altima Key Fob Battery Replacement

Schwierigkeitsgrad

Easy

Schritte

6

Zeitaufwand

5 Minuten

Einleitung

If your 2016 Nissan Altima key fob isn't having a quick response as before, or isn't working whatsoever, use this guide to replace the battery.

They key fob means everything to your Nissan Altima; a key fob with no battery will not allow you to enter nor start the vehicle.

Step 3 requires you to remove the battery from device. Make sure to not touch any component inside with your hands.

  1. UyRC5ZYL6n5qUs1O
    UyRC5ZYL6n5qUs1O
    EyPXCpxYN1Ghccfx
    UmcQJVpZb1nwtENx

    • Slide the little switch up on the back of the key. While doing so, remove the physical key that is stored inside the fob by pulling away.

  2. UyRGGyFcofGOLaB6

    • Insert a flathead screwdriver or prying tool into the small notch located at the bottom of the key fob.

    • Carefully rotate the flathead counterclockwise to pry apart the two halves of the fob.

  3. fmJDJWu6EBgqVXhg

    • Pry out the battery with a flathead to avoid skin contact with electrical components.

    • Make sure to avoid touching the motherboard.

  4. ltDgQ16lsaTVUGsq

    • Now carefully place the new battery onto the silver platter.

    • Keep in mind positive side of the battery will be facing downward, while negative side will be facing towards you.

  5. TFtDeXZypuqUSDfD

    • Line up the parts in order to secure the key.

    • Press down until the case makes a "click" sound.

  6. VjL4QwCTqIwYTGdY

    • Finally, insert the physical key back into the fob to complete your replacement.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Giovanni Avalos

Mitglied seit: 06/12/22

160 Reputation

0 Kommentare