AARP RealPad MA7BX2 Motherboard Replacement

Geschrieben von: Alana Escue
  • Kommentare: 1
AARP RealPad MA7BX2 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

11

Zeitaufwand

25 - 45 Minuten

Einleitung

  1. GTfWcY6dr6oZJvU5
    GTfWcY6dr6oZJvU5
    EQWGeSQEJOK3YPI5

    • Loosen the back cover using the suction cup.

    • Pull up on the center of the back with the suction cup.

    • Pull up on all four corners of the back with the suction cup.

  2. nWIMdEXBxiaQNnCR

    • Remove the back cover by gently placing the small opening tool in the crevice created by loosening the back.

    • Slide the opening tool around the edges of the device.

    • Wedge it open using the opening tool.

    • Use the suction cup again if you're having trouble removing the back cover.

  3. YXMtumN5PYGOab3Y
    YXMtumN5PYGOab3Y
    dwjBYNIIsVI3FqO1

    • The black tape is stuck to delicate wires; remove with caution.

    • Peel off the silver tape.

    • Gently pull off the black tape.

  4. lIWvywqUYvMmNb5x
    lIWvywqUYvMmNb5x
    XIS3yq5OSswYS3HX

    • Using a JIS #000 screwdriver, remove the two 2.5 mm screws.

  5. dAPvko5IFGFhHCiR
    dAPvko5IFGFhHCiR
    JnSNnTQHALNk5rvS

    • Lift off the black audio cover.

    I added a blue box around the audio cover and relabeled your instruction to be a blue dot instead of a black dot.

    I also recommend retaking step 5's first photo with your hands out of the picture so that the person can see the whole black audio cover.

    matthew jones -

  6. ZFt2T5rRTjDPSPDi
    ZFt2T5rRTjDPSPDi
    4OQ21YmiitmKlYBO

    • Remove the two JIS #000 screws.

  7. aIRkntXDluHloJK1
    aIRkntXDluHloJK1
    rBtWf2HLqLJLlEWB

    • Flip up the small black connectors using a spudger or your nails.

    • Be careful when flipping them up. Too much force can cause them to break.

  8. BcuoZnfiA2jZoE1C

    • Remove battery.

    • Removing the battery may need some force. Be careful as to not break anything.

  9. psWaMoL5FN6PkFpt
    psWaMoL5FN6PkFpt
    31DvutTHuVkhtQSf

    • Use the tweezers to loosen up the sides of speakers by going into the gaps, before picking it up.

    • There are magnets holding down the speakers. Be careful as to not pick them up with the speakers.

    • The top of the speakers are very fragile and may fall out at the slightest touch. Be careful when picking them up.

  10. iCjjNTQYAGf4mQPJ
    iCjjNTQYAGf4mQPJ
    vbc3JUKapEInP3Aw

    • Remove all wire connections by sliding them out of the connectors.

    • Be careful as to not forcefully pull out anything because the wires are very delicate.

  11. uqLYRYKahxiujcQQ

    • Take off the motherboard and set it aside. Your Finished product should look like this.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Alana Escue

Mitglied seit: 18/09/18

425 Reputation

0 Kommentare