Einleitung

This guide outlines the removal of the RAM for repair or replacement.

  1. rTGGAIHZOpXDBf1Z
    • Lay the laptop flat on a hard surface with the bottom facing up and the battery pack on the side closest to you.

  2. ls2aiUFG1KmF2gWJ
    ls2aiUFG1KmF2gWJ
    MncKfsvRV13sBTEp
    • Use both index fingers to push both spring tabs inwards towards the center of the laptop.

  3. Cpp1VmdIhmrgNyPJ
    Cpp1VmdIhmrgNyPJ
    K2VAOOTxPcSNqONC
    HVMKNqbRFgUwEBwV
    • With the spring tabs pressed inward, use your fingernails to lift of the edge of the battery, pivoting it up and towards you.

    • Pull the battery pack up and away from you to completely free it from its recess in the case.

  4. dF2EWHblZEFolTue
    • With the battery removed, locate the RAM cover.

  5. eLRH16WWw5gYTxeQ
    eLRH16WWw5gYTxeQ
    X3KOMyjMhVbZvfgM
    • Use your thumb to pry up the exposed edge of the RAM cover. Once this edge is lifted, the cover will come free.

    • With the RAM cover removed, carefully peel back the silver foil that protects the RAM.

  6. cVVRWiQ1jSwWI6KT
    cVVRWiQ1jSwWI6KT
    QmNYQoRfJ5qg4HQ4
    • Use the plastic opening tool to push aside the two silver tabs that hold down the RAM module.

    • In order to detach the tabs , use the plastic opening tool to pull the tab slightly toward the battery pack, then push outward away from the RAM module.

    • The RAM module will pop upward at a slight angle when both tabs are detached.

  7. sOEeBQbYWPmx4TUo
    sOEeBQbYWPmx4TUo
    YnOlbC3dGnf6PXrK
    • Carefully grasping the edges of the RAM module, slowly pull it free from the pin connectors underneath the edge of the foil.

    • Pull the RAM out at the same angle that it pops up naturally to. Ripping the RAM free at other angles can damage the fragile pins.

  8. 5WJKWnMfrGGCU4LO
    • Remove RAM module entirely for repair or replacement.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Patrick Hallahan

Mitglied seit: 30/01/12

38 Reputation

0 Kommentare