Einleitung
This guide will take you through the steps of replacing a cooling fan that is no longer working.
Werkzeuge
-
-
Use a Phillips #0 screw driver to remove all ten 10 mm screws around the back of the laptop.
-
-
-
Wedge a plastic opening tool under the rear case near the hinge.
-
Pry around the outer edge to release the plastic clips holding the rear case to the laptop.
-
-
-
Use a Phillips #00 screwdriver to remove all three 4mm screws around the fan.
-
Using the same screw driver, remove the four 4mm screws from the part of the fan that is above the processor.
-
-
-
Gently wedge two plastic prying tools on both sides of the black part of the connector.
-
Carefully pull out the connector from its socket.
-
-
-
Once all screws and the connector are removed, you can safely pull the fan out of its place.
-
To reassemble your device, follow these instructions in reverse order.
