ASUS TUF Gaming F15 FX506L Back Cover Replacement

Geschrieben von: Clay Eickemeyer

Kommentare: 2

ASUS TUF Gaming F15 FX506L Back Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

Zeitaufwand

10 - 20 Minuten

Einleitung

Follow this guide to remove the back cover on your ASUS TUF Gaming F15 FX506L. This procedure gains you access to all of the device internals, allowing for repair or replacement of any component.

Werkzeuge

Schritt 1

For your safety, discharge the battery below 25% and power down your device before disassembly.
Use a Phillips screwdriver to remove the 10 screws securing the back cover:
Seven 11.6 mm screws
Two 14.6 mm screws
One 6 mm screw
Use a Phillips screwdriver to loosen the captive screw.
Loosening this captive screw will pop up and separate the bottom-right corner of the back cover from the chassis.
During reassembly, tighten the captive screw before the rest of the screws.

Schritt 2

Insert an opening pick between the bottom-right corner of the back cover and the chassis, near the captive screw.
Pry up to release the clips securing the back cover.
You'll hear a click whenever a clip is released.

Schritt 3

Insert your opening pick again between the top-left corner of the back cover and the chassis.
Insert the pick at a steep angle. Pry up to release the remaining clips securing the back cover.

How Much Storage can Upgrade to The Asus Tuf F15 fx506l

S Canvas -

This ASUS TUF supports up to 8 TB of SSD storage between two M.2 2280SS slots, according to the main product page.

Clay Eickemeyer -

Schritt 4

Lift the back cover off the chassis and remove it.
If your back cover is stuck to the chassis, use an opening pick to release the clips around the back cover's perimeter.