Einleitung
Werkzeuge
-
-
Lift the keyboard enough to expose the two ribbon connectors (LCD flex cable and flex band).
-
Use the Plastic Opening tool to push open the two black clips on each side of the connecting cords.
-
Remove the cable after pushing out the two black clips.
-
-
-
Push out each end of the black clip with a plastic opening tool or nylon spudger to remove the ribbon cable.
-
Remove the cable after pushing out both black clips.
-
Remove the keyboard.
-
-
-
Remove the thirteen 5 mm J0 screws from the back of the laptop.
-
With the keyboard removed, use the spudger tool to pry around the edge of the laptop until it is free.
-
-
-
Use the spudger tool to unplug the two cords from the body by pushing on the tabs on both sides of the plug.
-
-
-
With the previous two cords unplugged and out of the way, you can work on unplugging the black cord.
-
Use your fingers to pull up on the clear tab, or use the spudger tool to push out both sides of the connector.
-
To reassemble your device, follow these instructions in reverse order.