Einleitung

It is possible that your battery has stopped working due to physical or electrical damage. A replacement batter will need to be purchased. After purchasing a new battery follow these steps to replace your broken battery.

  1. qWC1aeIsA1M1OGch
    • Use the Phillips #00 screwdriver to remove the seven 90mm screws.

    • Use the Phillips #00 screwdriver to remove the four 50mm screws.

  2. ZWLs3MKHBgUBenEC
    • Next, use the plastic opening tool to carefully pop off the keyboard cover panel.

    • Be cautious when pulling off the cover because there are cables you will have to disconnect before completely removing the panel.

  3. CXxHpdwpMKHTAh4d
    CXxHpdwpMKHTAh4d
    WgEmifKaORvyMPDt
    • Lift palm rest and unplug keyboard cable and touchpad cable using tweezers. After these two cables have been unplugged you can remove the keyboard cover panel.

  4. nlEF1UGiDRqvgCVT
    nlEF1UGiDRqvgCVT
    JqV1ZEYNuKqOUC5e
    • Lift Palm Rest away.

    • Replace with new palm rest.

  5. 6fGbOpcxWkNqoKls
    • Next, locate the battery in the front of laptop (closest to you).

  6. 6fiaoFpjc6IVvoqU
    • Unplug the battery from the laptop in the upper right hand corner of the battery using tweezers.

    • If battery is not unplugged, motherboard may shock you.

  7. jijRAXEnd4NGlDMP
    jijRAXEnd4NGlDMP
    JMigrQg2aGxLfoCC
    • Use the Phillips #00 Screwdriver to carefully remove the 6 screws holding the battery in place.

    • Once you have removed all six screws carefully lift the battery out and dispose.

    • Each screw is 50 mm in length and 15 mm in diameter.

Abschluss

To reassemble your device, follow these instructions in reverse order.

David Conner

Mitglied seit: 03/03/15

292 Reputation

Ein Kommentar

Thank you for posting this

SteveFFFFF 0 -