Einleitung

This guide will show you how to replace the screen on a ASUS X552LAV-BBI5N08 laptop.

  1. hPXc6nt1AgZLDNCw
    • Battery is not showed in pictures.

    • Flip the laptop face down.

  2. eKupR2hrKlECsxHH
    eKupR2hrKlECsxHH
    3w4b4hsGrhwXxUgf
    ppKJEbQEPhyEgCia
    • Slide the right button to the left.

    • Hold the left button to the right.

    • While you hold the left button in position, slide the battery out by pushing it away from you.

  3. FeYILRQapRkMUF1E
    FeYILRQapRkMUF1E
    iStjkCmTvEkEPByg
    bWWZQmk5v1OPVGZX
    • Remove the six 12mm screws located at both the battery area and the bottom panel, with a Tri-wing Y1 screwdriver.

    • Slide the bottom panel down and lift it up to remove.

    • Remove the seven 5.5mm screws located at the bottom area with a Tri-wing Y1 screwdriver.

  4. JhYmshgdFwclBw4N
    JhYmshgdFwclBw4N
    uugsORoKROImihAA
    NDG6gqZh2NOu2IxF
    • Use an opening tool to split keyboard from base of the laptop.

    • Make sure to start from one end and go around the edges.

    • Flip laptop to sit on its bottom.

    • Lift keyboard up by the front edge.

  5. pfGRksfOQSHXis6A
    pfGRksfOQSHXis6A
    dTBmNOVZJWFJTMfp
    rlxyJGJqy6GFfvkN
    • Flip up the small locking flap for the two ZIF connectors.

    • Unplug the connectors that are keeping the keyboard connected.

  6. AfCdyKoOiifHUWvQ
    AfCdyKoOiifHUWvQ
    vA2MUCUVeelhXdK4
    YBVVnJoC2nX6a2Mn
    • Flip up the locking flap for the ZIF connector.

    • Unplug the connector.

  7. 1wgaRlGjMyRrXhMw
    1wgaRlGjMyRrXhMw
    rnwtt55CqKGXoQCr
    A5HIk34QoguvfKyc
    • Flip laptop to sit with the screen on the bottom.

    • Use tweezers to remove the square decorative sticker from the top of screws from the edge of the screen frame.

    • Remove six 4mm screws (with a JIS #1 screwdriver) from under the stickers and both of the hinges.

  8. qONU54mH15Mr1AV2
    qONU54mH15Mr1AV2
    OvQ1WsOMIFuhFX4W
    • Release hinges with the motion of opening a book.

  9. 3W6qWLDDfh2yUvJZ
    3W6qWLDDfh2yUvJZ
    a4u3PNEgAoRVHNlv
    LXGnigUQDQJJZ4Wv
    • Use an opening tool to pry apart the frame from the edge of the screen

    • Go around the edges til the frame pops off from the screen

  10. cX4ZTbPfPGjbHAM3
    cX4ZTbPfPGjbHAM3
    GpudZmcQVSqVQf4C
    fLOYEINqPc64fBDU
    • Remove eight 4mm screws from the corners of the screen using a JIS #000 screwdriver.

    • Flip the screen towards the bottom panel face down.

  11. 2ALTYZLIJxmDHxU2
    2ALTYZLIJxmDHxU2
    2bk3bdmlXj2FZaVE
    4fqmDic1tP2JDSvF
    • Use tweezers to remove the tape from the top of yellow lock.

    • Open the yellow ZIF connector.

  12. wdMt1ILNNlVLFQta
    wdMt1ILNNlVLFQta
    RNmIUkAKlUdD16jQ
    • Remove the tape completely from the back panel.

  13. xVXwFTMYOFmIMQ4M
    xVXwFTMYOFmIMQ4M
    sYEsGJSBDV4BF3Qg
    Y52vrKRuCT5wTqit
    • Remove the casing from the edges of the screen by removing the eight 2mm screws with a JIS #000 screwdriver.

    • Pull the screen up to remove it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jason Vo

Mitglied seit: 15/02/18

857 Reputation

0 Kommentare