ASUS ZenWatch Charging Cradle Circuit board Replacement

Geschrieben von: Wayne McClure
  • Kommentare: 1
ASUS ZenWatch Charging Cradle Circuit board Replacement

Schwierigkeitsgrad

Easy

Schritte

2

Zeitaufwand

15 Minuten

Einleitung

Replacing the circuit in the charging cradle

  1. PjHGTBDmgJSLTa5c
    PjHGTBDmgJSLTa5c
    IeFtggL4iC2IWpUT
    aSUFUZHAwlvBKspP

    • Using a metal spudger gently pry the plastic outer case apart

    • Pry open a little bit on each side before trying to open fully

  2. cXoAPUjSqUcLZAQy
    cXoAPUjSqUcLZAQy
    wujTyJNCGXFrUhY5
    VYjVJUVQuJwFIkLV

    • Use the PH0 sized Phillips screwdriver to remove the three screws (2mm) holding the board to the cradle.

    • Gently pry up with your hands to pull the board off.

    • Don't grab directly on the USB port as you may loosen or bust the connections.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Wayne McClure

Mitglied seit: 10/02/16

952 Reputation

Ein Kommentar

If you had listed what components were on the board or at least taken a picture of the other side of the board, I might have given you some points.

Nate Fansler -