Einleitung
Looking to replace your damaged temperature controller and don't know how? In this installation guide, we will teach you how to replace a new temperature controller. You can easily do it in just a few steps. This installation is based on the AUX-208P1 electric kettle, but the same concept is also applicable to the replacement of other electric kettle temperature controllers.
Werkzeuge
-
-
Use a Phillips #0 screwdriver to remove the three 19 mm screws at the bottom of the electric kettle.
-
Remove the base of the electric kettle.
-
Remove the LED indicator buckled on the base.
-
-
-
Use combination pliers to clamp the connection between the electric kettle line and the old temperature controller to create a gap, and pull it off.
-
-
-
Remove the broken temperature controller.
-
Clean the bottom of the kettle to remove any dust or debris buildup.
-
-
-
Align the socket on the bottom of the new temperature controller with the protrusion on the bottom of the electric kettle to assemble.
-
-
-
Re-buckle the removed LED indicator back to the base.
-
Buckle the base back to the bottom of the electric kettle.
-
Use a Phillips #0 screwdriver to three 19 mm screws on the bottom of the kettle.
-
重新组装设备时，请依次相反的拆卸顺序。
