Einleitung
This guide shows you how to replace the RAM card.
Werkzeuge
-
-
Use tweezers (or a similar tool) to slide the orange push pin. To release the battery, push it to the left.
-
-
-
Remove three 7.0 mm screws with a Phillips head screwdriver from the back panel to gain access to the RAM cards.
-
-
-
Place the device with the battery side facing up, as shown on the picture.
-
After removing the back panel, you will see the RAM cards located to the right.
-
-
-
You should notice a silver tab on each side of the RAM card. Push each tab away at the same time to detach the card.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.