Einleitung

  1. PVrGtZXO5xIRjxJi
    PVrGtZXO5xIRjxJi
    uu1pKSqxqPZBJi4i
    • To mount the keyboard, put the keypad and press until it clicks

  2. 2TBZl4k1lA3ZIZTo
    2TBZl4k1lA3ZIZTo
    KcNmRmfGpSmyusnB
    • To mount the network card, we have to put it diagonally if it can not be broken.

    • When it is already on, it is only necessary to adjust the screw.

    • To connect the two cables we have to put it on their sites and press until one click.

  3. ut3PL6VXVqQBaAQM
    ut3PL6VXVqQBaAQM
    wCVCtRKwgV1s3H2i
    • To mount the processor, what we have to do is put it straight, if the pins break, it will no longer work.

    • When it is well placed, we only have to adjust the screw until it is well fixed.

  4. 1u5VIst6NUldOqLW
    1u5VIst6NUldOqLW
    HHhQJigBp3qdBVZW
    • To mount the heatsink, we have to take good care of it, and if the processor could not be reheated, it would be wrong.

    • When it is well put put the four screws to fix it.

    • Set the heatsink to the fan.

  5. NJWdaJiXjhLnKvPB
    NJWdaJiXjhLnKvPB
    SGwUCf1jYNKEqjG3
    • When it is already cleaned, we return the four screws to it so that it does not open.

    • Then we place it in its place on the motherboard and fix it.

    • We do not forget to connect the cable.

  6. ZF6AUUQCugqKCJVD
    ZF6AUUQCugqKCJVD
    A13BxGGhDDESWYsK
    • To place the RAM we have to be careful that it can also be broken as the network card

    • We have to put it diagonally so it does not break.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Carlos Ibañez

Mitglied seit: 08/05/17

231 Reputation

0 Kommentare