Einleitung

Use this guide to remove the back cover of your device.

  1. ZpShRmccjUYxGSp5
    ZpShRmccjUYxGSp5
    H4hqVtvMFYjKcO4f
    • Turn the laptop off and remove the power cord.

  2. CxmpT2LNZJLQwncE
    CxmpT2LNZJLQwncE
    2V2vnfGXcRVHlx3j
    • Press in the SD Card or the SD Card Dummy if no SD Card is there. Remove card when it pops out.

  3. ZDfe4MDGPUnBDr2L
    • Flip the laptop over on its face, so that the back is showing.

  4. 1QCqo2PfGavcHm4v
    • Put grounding strap on one of your wrists and attach the other end to a large metal object (recommended method).

    • If you don't have a grounding strap an alternative approach is to touch a metal object that is either large or connected to the earth. Then avoid doing things that would accumulate static electricity on your body.

    • Touching the internals of your device while you aren't grounded could destroy your laptop.

  5. yiaftX3bXLpWKLcc
    yiaftX3bXLpWKLcc
    oSN4vWDekYSPOnyr
    • Unlock the battery by flipping a switch near the release latch.

  6. vnnZnGNpmbGfUYIh
    • Slide the release latch to the left to release the battery from the PC.

  7. 2CsLFr1sDPFiW2pQ
    2CsLFr1sDPFiW2pQ
    wAKmnBxDfuBEsQU5
    • Use your hands to pry the battery free of the computer.

  8. b5ZAEZckYCgZTPKR
    b5ZAEZckYCgZTPKR
    XZryXbhRuyOYfKay
    • Unscrew the 2 captive screws and 3 M2.5 x L8 screws holding back cover in place.

  9. dqnleeFElNNNchPw
    dqnleeFElNNNchPw
    xDdPIqBwLBhsuLqr
    • Use spudger to pry open the back panel.

    • Then lift panel off of the computer.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Dwyer Deighan

Mitglied seit: 25/03/18

340 Reputation

0 Kommentare