Einleitung
Werkzeuge
-
-
Grab a spudger and work your way around the outer edge of the screen
-
Lean the screen all the way back to remove the plastic frame from the hinges at the bottom
-
-
-
Unscrew the 4 screws around the edge of the screen
-
Lean the screen all the way forward on to the keyboard
-
-
-
Peal up the sticky tape next to the screen connector
-
Pull the connector down carefully away from the screen and disconnect it
-
-
-
connect the new screen and screw back in place
-
Turn on the screen to test before putting the screen frame back on
-
Tilt the screen all the way back and push the frame back on hinges 1st.
-
Finally lean the laptop on its edge and clip the back on the hinges back in place.
-