Einleitung

This guide will show how to remove the small back plate on your netbook. The removal of the plate is necessary to access your netbook’s RAM.

  1. ZbMRIUCHbJdbaxQ4
    • Press the power button to turn off the netbook.

  2. PkB3bJCB4HWODmvB
    • Place the netbook bottom-side-up on a flat surface.

    • Locate the unlock latch on the top right corner of the back.

  3. m5RSuCEFNnxCrqwL
    • To unlock the battery, slide the lock latch in the direction indicated by the unlocking icon. You should see the orange indicator which means that the latch is unlocked.

  4. vmIHYX1VtrrVTjd4
    vmIHYX1VtrrVTjd4
    igIQXSyJGg31SjbT
    oHjSrXBTRCPUXeGZ
    • On the opposite side, slide and hold the release latch.

    • Gently slide the battery out.

  5. DHxtfLChiWUZKhFQ
    • Use the #0 Phillips Screw bit with the Screwdriver to remove the single 6mm Phillips screw from the small back plate.

  6. MWALHSZRCTLZYW1L
    • Use the plastic opening tool on the recessed notch at the bottom of the small plate to gently lift the plate up

  7. AlMB6aqBOuPHBWNY
    AlMB6aqBOuPHBWNY
    1JpnbQZKQjvedYaH
    • Once the plate becomes unhinged, gently rotate the plate to take it of of the device.

  8. FyQyYReYdaftnlyv
    FyQyYReYdaftnlyv
    AnPfROA1QRraT1Bp
    • Using two fingers, gently spread the latches on the sides of the RAM card until the RAM card props up.

  9. VYmNIwgQUm2k4rY5
    VYmNIwgQUm2k4rY5
    YR2EQeEFlbgZHVDA
    • Once the RAM card is propped up, carefully pull it out of its port.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jair Burgos

Mitglied seit: 15/09/16

425 Reputation

0 Kommentare