Acer Aspire V5-571 Wi-Fi Half Mini PCIe card Replacement

Geschrieben von: ZFix
  • Kommentare: 4
Acer Aspire V5-571 Wi-Fi Half Mini PCIe card Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

20 - 25 Minuten

Einleitung

How to disassemble the laptop and replace the Wi-Fi (WLan) Half Mini PCIe card.

_____________________________________________________________________________________

  1. FyaJlcsBiKUiCRkJ
    FyaJlcsBiKUiCRkJ
    mhJK4y6O15LtLHVB
    FrNQPBFqGXuwL5ZC

    • Turn off the laptop and remove the battery.

    • Remove two screws securing the Keyboard.

    • The Keyboard is held by two locking clips, under the battery. Use the sharp tip of a plastic tool to release the keyboard.

  2. HCSfFlDNLlcmDLm2
    HCSfFlDNLlcmDLm2
    kmTdBs6EXEghaMlM
    TQGl1OejYatyQNh1

  3. KwZlPgb4gCwlEMwa
    KwZlPgb4gCwlEMwa
    DyWeEl2Bo4b6ZdMZ
    n1w3bVqOYHLnTZQG

    • Remove 4x phillips screws and disconnect:

    • Power On button flex cable

    • Touch pad flex cable

    • Remove 18x Phillips screws from the bottom cover.

    • Remove any memory SD Card from the Card reader.

    • Start opening with a plastic opening tool.

    After removing the 18x Phillips screws, the laptop is VERY fragile in the hinge area. The bottom cover will easily crack or break in the hinge area when opening the laptop with no screws, particularly the left side near the power button. Possibly this step should be revised to recommend opening the laptop 90 degrees before removing the 18x screws. Or, advise extreme caution when opening the laptop with no screws.

    jonnyquest -

    Hi, do you know where buy screws that you mention in step 4? “Remove 18x Phillips screws from the bottom cover.”

    I am italian. Thank you anyway.

    Sara Caruso -

    The laptop I have included 6x screws from inside and 16x screws from the bottom. This seems to be a minor variation from model to model.

    William Fulton -

  4. G5HJONTYW2GMIDeP
    G5HJONTYW2GMIDeP
    VMghNQJFv3UsauRc
    i3XtIg5LZLfurgAX

    • Carefully separate the upper cover and remove it.

    In my unit, there was also a screw holding the DVD drive in place, just toward the center from the drive itself. This screw also had to be removed to be able to remove the upper cover

    Ken Hill -

  5. E4rrNykDAcGPecw1
    E4rrNykDAcGPecw1
    yCxROOurgGgRW3BL

    • Remove one Phillips screw, securing th WLan card and disconnect the two coaxial antenna cables.

    • Remove the Wi-Fi card.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

ZFix

Mitglied seit: 09/12/13

188213 Reputation

0 Kommentare