Einleitung

The HDD is responsible file and program storage. It also holds the operating system, and when the HDD is no longer functional, the computer will likely not even boot. It may also make unusual noises.

  1. qQ2NVhhVVSvsCZyN
    • Use the pointed end of the spudger to slide the battery lock until the battery pops loose.

  2. UJAl5hNsxmCCA3TV
    UJAl5hNsxmCCA3TV
    X1t4EQQi5LEIZL4c
    • Slide the battery out of the battery slot.

  3. XFvtUOlwNpav6iuV
    • Remove the two 6mm PH1 screws from the bottom of the laptop.

  4. pY4mQvc6RiXxi2cA
    • Use the spudger, push the two tabs, located in the battery slot, through their slots to release the keyboard.

    • Do this with the computer slightly open for ease.

  5. y1MWDCjSkpnA6BiZ
    y1MWDCjSkpnA6BiZ
    l2vn3ojbXnPvPGtT
    • Open the laptop.

    • Start top of the keyboard and use the opening tool to pop the remaining tabs around the keyboard loose.

    • The keyboard can be flipped onto its face once removed.

  6. tgBqoPdwEYE1iV3Z
    • Use the spudger and slide the grey tabs on either side of the keyboard wires away from the white plastic.

  7. eF5vSJqxdkZOYTLD
    • Disconnect the keyboard by pulling the blue tape on the wire strip.

  8. Dp3rvqsp5LiseUTJ
    • Remove the five 6mm PH1 screws beneath the keyboard.

  9. GPkBW2ViN5vNUXli
    GPkBW2ViN5vNUXli
    GgoKnuXUqNKPGHiV
    • Use the spudger to pop the gray tab up and away from the far left wire strip.

    • Disconnect the wire strip by pulling the blue tab loose.

  10. BCt2yFhKDtCKATZ4
    BCt2yFhKDtCKATZ4
    1QMn3MhhLYwlcmGG
    • Use the spudger to pop the white tab up away from the wire strip located at the top left corner of the mouse pad.

    • Disconnect the wire strip by pulling the blue tab.

  11. 3BjAsPBa2eZp5IeG
    • Close the laptop.

    • Remove the remaining 18 6mm PH1 screws from the bottom cover of the laptop.

  12. HiDZJTP3fmwyvHcP
    HiDZJTP3fmwyvHcP
    Qrgt5HWT2pIiIxYZ
    AiYqplvMUsYQwOM6
    • Use the opening tool to separate the back of the laptop from the inside cover.

    • Open the computer and remove the inside cover.

  13. lvt6O2hZYgMEN6pS
    lvt6O2hZYgMEN6pS
    XbG5dgtBDgFW5EaP
    CHSZorvaYOWR1yEy
    • Lift the HDD out of the base and use the opening tool to disconnect the HDD from the motherboard wire.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Lakbira Sheffield

Mitglied seit: 29/01/18

673 Reputation

0 Kommentare