Einleitung

The Acer Aspire V5-591G-75KE is manufactured with a Qualcomm Atheros NFA344A wireless card.

  1. KdZacoMDXhooELHW
    KdZacoMDXhooELHW
    6qTCEahXGakbayH2
    5jZZiMCsfEyhVIDV
    • Close down the display and flip the device upside down.

    • Use a Phillips #1 screwdriver to remove 18 black 10mm Phillips Head screws in order to loosen up the protective bottom casing.

  2. VuY3H6gcoUUqRcjH
    VuY3H6gcoUUqRcjH
    siRecUXEtLITgfVv
    • With the screws removed, flip the device right-side up and open up the display.

    • Run a plastic spudger tool along the seam of the face-plate in order to loosen up the protective bottom casing.

    • Popping sounds are normal, but forceful prying can damage delicate components. Be especially careful near the USB and HDMI ports.

  3. P4cTtY4ZQFIKqPnw
    P4cTtY4ZQFIKqPnw
    iaPelbDHMCtkAZnv
    • Close the display down once more, and flip the laptop upside down, with the hinge facing away from you.

    • Do not yank the bottom casing off. There is a small speaker wire that connects it to the motherboard.

    • Taking note of the small speaker wire, gently lift only the left side of the bottom casing.

  4. ECIY1nHG5qRhakpy
    ECIY1nHG5qRhakpy
    gHPVLYH1SIvUCsi2
    kFXLy6GtCXuCKTEU
    • Using a pair of blunt tweezers, push on the tabs of the small white connector to separate it from the motherboard.

    • The entire bottom casing should lift with no resistance. If there is too much resistance, verify you removed all the screws, and run the plastic spudger tool around the face-plate again.

  5. bTLXZmc1HqYIv3Qg
    • Locate the wireless card on the top left quadrant. It should have two antenna cables connected to it, one white and one black.

  6. rMMgaXVXQuUxnRCW
    • With a pair of blunt tweezers, firmly grasp each antenna head and detach it by lifting straight up.

    • The antenna cables are connected through small sockets. Small popping sounds when attaching and detaching the antennas are normal.

    • Note that the white cable connects on the top socket.

  7. jqsn4geaGmaeqSQF
    jqsn4geaGmaeqSQF
    hlhtQWCpA3MeWd1D
    • Using a Phillip Head size 1 screwdriver, remove the screw attaching the wireless card to the laptop frame.

    • To detach the wireless card, lift up slightly and pull away.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tasier Hagler

Mitglied seit: 19/10/17

428 Reputation

0 Kommentare