Acer Chromebook C720-2827 SD Card Reader/USB Port Replacement

Geschrieben von: Jason Bechtold
  • Kommentare: 0
Acer Chromebook C720-2827 SD Card Reader/USB Port Replacement

Schwierigkeitsgrad

Easy

Schritte

13

Zeitaufwand

10 Minuten

Einleitung

This guide explains how to remove the SD Card Reader and the USB Port next to it. Before removing the two ports, the back panel assembly, battery, and speakers needs to be removed. Once all of these are removed, the two ports can be easily disconnected from the Chromebook.

  1. MyLdgQf6Zn1tO2FI
    MyLdgQf6Zn1tO2FI
    dLJ25EhqNmTKN3dr

    • Remove the thirteen 6.0mm screws on the back panel using your Phillips #1 screwdriver.

  2. lR5WbnKWoRx62Quq
    lR5WbnKWoRx62Quq
    KqBStIyOZagSGgRY

    • Pry the back panel open with the plastic opening tool.

  3. bEifEDb6GbWFS6ZW

    • Remove the two 6.0mm screws securing the battery with your Phillips #1 screwdriver.

  4. SELp6IgiYH6eX1pq
    SELp6IgiYH6eX1pq
    cujNNOK6lBBkW2RD

    • Carefully pull out the battery wire connected to the battery port.

  5. r6rbuF3hnZdHSXpk

    • Slowly lift the battery to remove it from the Chromebook.

  6. lNx3rRUVPSEsdkKY
    lNx3rRUVPSEsdkKY
    rttOrfasNgVjP6sS

    • Unplug the speaker wire from the motherboard.

  7. 5jZuDbP5tUdv2nsW
    5jZuDbP5tUdv2nsW
    v2ZIfEKLBjfKHmbv

    • Carefully pull out the speakers from each side of the Chromebook.

  8. vpZoErVhGaQ5jEXl
    vpZoErVhGaQ5jEXl
    aPGaLDsFZgLXEZR4
    UiL6EntAQQHSFOGS

    • Remove the three 6.0mm screws using the Phillips #1 screwdriver.

    • Remove the two 3.0mm screws using the Phillips #1 screwdriver.

  9. kQZ4HmTfmAKRxA1u
    kQZ4HmTfmAKRxA1u
    uM4LlMLrgDgkEASB

    • Position the spudger under the switch that connects the ribbon cable to the motherboard.

    • Flick the spudger up to flip the switch up.

  10. VdSCC2ANMeeoOSTw
    VdSCC2ANMeeoOSTw
    NKBXXVbDmePTNQjw

    • Pull the blue tab on the ribbon cable to remove it.

  11. QdMVNWnBofwbbygM
    QdMVNWnBofwbbygM
    mo6U4WYXTfrOCE2p

    • Grab the edges of each piece of circuitry that is included with the SD Card Reader and USB Port.

    • Pull each piece of circuitry out of the Chromebook and remove it from the device.

  12. AYqkMs2yCttwAaAY
    AYqkMs2yCttwAaAY
    JJXYBkcXbi1Tm1Rl

    • Position the spudger under the switch.

    • Flick the spudger up to flip the switch up.

  13. mK4FxuDCJMcAkjr6
    mK4FxuDCJMcAkjr6
    abQ1RbGtgLSAxXll

    • Pull on the blue tab of the ribbon cable to remove the ribbon cable.

    • Repeat the previous step and this step with the other ribbon cable that is attached to the SD Card Reader/USB Port.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Jason Bechtold

Mitglied seit: 19/10/17

611 Reputation

0 Kommentare