Einleitung
Werkzeuge
Ersatzteile
-
-
Using a plastic opening tool or a spudger, carefully pry the plastic bezel around the screen.
-
-
-
Remove the four screws holding the display in place with a Phillips #1 screwdriver.
-
Carefully lower the display to rest on the keyboard.
-
-
-
The display connector is located on the back and is covered by some adhesive tape.
-
Carefully peal the tape back
-
Once the tape is peeled back, you can lift the bar to disconnect the display cable.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.