Acer Iconia A100 Battery Replacement

Geschrieben von: Omar Acosta
  • Kommentare: 0
Acer Iconia A100 Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

5

Zeitaufwand

5 - 10 Minuten

Einleitung

A step-by-step guide that illustrates the necessary precautions for replacing a battery for the Acer Iconia A100 tablet.

  1. Qo4URvigtyLlHHQE

    • Start at any side of the tablet.

    • Begin to take apart the tablet with a plastic opening tool along the sides of the tablet.

    • Work your way around the tablet.

    • There are four side pieces in total.

  2. bNsXuvirUQsFQdR6

    • Remove the five 4 mm screws from the edges of the tablet with a Phillips #00 screwdriver.

  3. JvyNaWXWJUqIlOLJ

    • Carefully separate the back piece from the device using a plastic opening tool.

    • Remember to open along the entire perimeter of the tablet.

  4. fK2IZVBxcdBl6UGx

    • Turn the tablet over so that the battery is facing upwards.

    • Remove the four 4mm screws located around the battery.

  5. cjDAoV2MDtsulbuA
    cjDAoV2MDtsulbuA
    rdssiTl3XaLhTZa1

    • Use the tip of a plastic spudger or opening tool to gently push the connector head out of its socket.

    • Use your fingers or the flat edge of a plastic opening tool to lift the battery up and off of the device.

    • Be sure to not have any water around the device while removing the battery.

    • Be sure to be cautious while removing the battery and remove carefully; avoid ripping the wires attached to the battery.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Omar Acosta

Mitglied seit: 03/03/15

526 Reputation

0 Kommentare