Einleitung

By using this guide, you will be able to replace the speaker or microphone from your tablet.

  1. AAgmDjLCwBJlR4RA
    AAgmDjLCwBJlR4RA
    VTDhNcqKwiplrFrM
    wYS4MEWEYXOJoQ4I
    • Insert a plastic opening tool into a gap near the charging port at the top of the device. Slide the tool in either direction along the device.

  2. fQIRhFnoMsbn6xZm
    fQIRhFnoMsbn6xZm
    NDT2EhRHrPfOyGsb
    pkRiDVHakVblyqF3
    • Slide the tool along until you have completely separated the rear cover.

    • If needed, place the first tool in the gap created to hold this gap open and use a second tool to pry the remaining portion of the rear cover off.

  3. dMMFwMMFBrVJ4hfs
    dMMFwMMFBrVJ4hfs
    MfFxZqaTqpHfCPgt
    • Once all the sides have been separated, you should be able to simply lift the cover off of the device.

  4. QVUKu23w3ELyLEuq
    QVUKu23w3ELyLEuq
    4VnEDQcovSBNZgym
    YXxWtVLUPLiCDdfN
    • Pry the speaker away from the device using the plastic opening tool. This may require a little force due to the adhesive that is on the device.(Battery is not shown in this picture for image

    • Tug gently on microphone to remove from slot.

  5. Nae3VF1dyRNanHVD
    Nae3VF1dyRNanHVD
    wXWKpg3SuIGuPCGM
    • Unwind the wire from the running channel.

    • To remove microphone, follow same steps.

  6. Cy4eadSkHEMV5SIY
    Cy4eadSkHEMV5SIY
    eBG3xxmFNXDirNPy
    • Unplug connector from motherboard.

    • Follow same procedure to remove microphone.

    • Unplug the microphone in a similar fashion as with the speaker.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Phillip Keavey

Mitglied seit: 17/03/15

319 Reputation

0 Kommentare