Acer Iconia One 8 Motherboard Replacement

Geschrieben von: Dustin Newland
  • Kommentare: 0
Acer Iconia One 8 Motherboard Replacement

Schwierigkeitsgrad

Moderate

Schritte

10

Zeitaufwand

20 Minuten

Einleitung

Follow this step-by-step guide to replace the motherboard for the Acer Iconia One 8 (B1-850). The motherboard contains the location where the major connections in the device come together. Before beginning, be sure to power off your device and remove it from any external source of power.

  1. YxSOSJ5BHNhTtcXy
    YxSOSJ5BHNhTtcXy
    i3pCUeMcEV1sDqXk

    • Begin by opening the back panel.

    • Wedge a plastic opening tool in between the front and back shell and gently separate.

  2. jkeCpHePas4Q3knZ
    jkeCpHePas4Q3knZ
    fFwpVdG2WvXEbJpH
    svQI2rKL513QYglp

    • Peel back all pieces of tape indicated in picture.

    • There are three pieces of tape total (2 Black and 1 Silver).

  3. XIw3DlvA5TlRiSDh
    XIw3DlvA5TlRiSDh
    XAWaShvQHRda1uxp
    eU3QPnxBISLDWmMQ

    • Disconnect all cables from the device.

    • There should be 5 total.

  4. 6JRS4FPKOlobGsw2
    6JRS4FPKOlobGsw2
    Cw3icTtnqwMJAjKG
    JHFIrVhWBaOQTyAL

    • Remove the nine 3mm screws using the Phillips #000 screwdriver.

  5. ZSPruIbRcLBaU2jK

    • Remove and separate the back plating (top) from the glass screen (bottom).

  6. DhCtTdRmQMebUwsF
    DhCtTdRmQMebUwsF
    wGhYOgSsIBtkJEtt

    • Disconnect the metal tabs connecting the battery to the motherboard frame.

  7. 16tobACWZvPHQdLZ
    16tobACWZvPHQdLZ
    AOum3JRW46JyL2I3

    • Disconnect the cable for the back camera.

  8. fBlY2fQcs2nKxE5b

    • Flip the metal plating to reveal the front camera.

  9. iKlRRBlejODLbbBw
    iKlRRBlejODLbbBw
    GXY2dQ2HmBaFlg5w

    • Use tweezers to carefully remove the front camera from the adhesive on the motherboard.

  10. rEEkFG6FAWBpnpvm
    rEEkFG6FAWBpnpvm
    ESGTLDVcIwshofys
    wCDWOuBlgUZDAWi4

    • Flip the device back over.

    • Remove the motherboard from the metallic frame by feeding the back camera and front camera cable through the port.

    • Remove the front camera from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Dustin Newland

Mitglied seit: 06/11/19

343 Reputation

0 Kommentare