Einleitung

Use this guide to replace a Solid State Drive (SSD) in your Acer Nitro5 (AN15-55) laptop.

An SSD is a piece of internal hardware that both stores and retrieves data in a computer.

An SSD failure can cause your laptop to run very slowly and/or continuously crash (the notorious blue screen of death) leading to potentially major data loss. In cases of complete SSD failure, your laptop’s operating system will not boot up at all.

Likewise, upgrading your SSD can increase your laptop’s performance. If your laptop is getting low on storage, getting too noisy or heated, or running more slowly than you’d prefer, consider upgrading the SSD. Most SSDs should fit in this laptop but take caution in confirming the compatibility of devices. If searching for an SSD on Amazon, use the Amazon Confirmed Fit tool to verify compatibility.

During preparation and installation, be very careful with the SSD, as the device, specifically the connector pins, are extremely delicate. Ensure that your current SSD is backed up before you begin the replacement process. Once ready, power off your laptop and disconnect it from any power sources.

  1. XoZMJxrj1dsaXUtA
    • Shut down your laptop.

    • Make sure your laptop is completely turned off to prevent damaging other parts.

  2. GBNXURHMAV5xGRpK
    GBNXURHMAV5xGRpK
    UjZ12TZNvPlFmOdq
    UFWkYEQlqfpTbJQ4
    • Flip the laptop on its back.

    • Remove the eleven 8 mm screws securing the back cover using the Phillips #1 screwdriver.

  3. EIMDqOuFecbSLtFV
    EIMDqOuFecbSLtFV
    4omGeRC1ymWmfiIG
    • Loosen the back cover using a plastic opening tool.

  4. nMSUIDPlWs6Q6IGR
    nMSUIDPlWs6Q6IGR
    ClFcQspAtUAkFQZF
    • Pull the back cover off and put it in a safe place.

    • A little bit of force is needed to pry open the clips at the corners of the laptop.

  5. FAYqvAYFeyQcubyC
    FAYqvAYFeyQcubyC
    hjIVkJWBLYmRHT35
    NWXb2faDs5tEI1gV
    • Remove the 2.6 mm screw that is holding down the SSD with a Phillips #0 screwdriver.

    • Make sure to ground yourself before working on the motherboard to prevent damage.

  6. 1FTt2VJflcbrKIHT
    1FTt2VJflcbrKIHT
    krDQuQCYcWDXKB5t
    RHPqqDXdXgGSNwG3
    • Gently pull out the damaged SSD.

  7. XuNw2XJNtIGFVkcD
    XuNw2XJNtIGFVkcD
    uwHOhku1hbEomJGY
    • Slide in the new SSD.

    • Screw it in place.

  8. TbolQYODCIIUWILK
    TbolQYODCIIUWILK
    EUskxxXyKFYNhRRg
    • Put the back cover on and gently snap the clips back in.

    • Screw the back cover in place.

Abschluss

Follow the guide that comes with your new SSD to make sure your laptop recognizes your new SSD.

Solomon Mekuria

Mitglied seit: 22/03/21

229 Reputation

Ein Kommentar

This model is supposed to have 3 slots 2 for SSD and 1 for HDD, can you please point them out? Just add an extra SDD?

mayumidb -