Acer One 10 S1002 145-A Battery Replacement

Geschrieben von: Shannon Griffin
  • Kommentare: 4
Acer One 10 S1002 145-A Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

9

Zeitaufwand

15 Minuten

Einleitung

This guide shows how to replace a dead or damaged battery. When removing the battery you will need to use ESD(Electrostatic discharge)-safe tools like a Heat gun or an iOpener.

  1. OGuI1UNuHRuCnqJs

    • Make sure that the tablet is turned off and disconnected from any power source.

    • Disconnect the tablet from the keyboard attachment.

    • If you have a Micro SD card in the tablet, remove it now.

    • Remove the two 3.5 mm Phillips #0 screws on either side the keyboard connection.

  2. cSqOUjJKD5enZhFa
    cSqOUjJKD5enZhFa
    LYFfUnLchSTVVXB1

    • Starting from a corner of the tablet, use the plastic opening tool to create a gap between the screen and the back covering.

    • Slowly maneuver the plastic opening tool along the perimeter of the tablet to pry the screen and back covering apart.

    • Separate the back covering from the screen.

    Doing this, i’ve broke some of the “hook” thing that keepsthe plastic back plate to the screen, so now is loose and not well closed. How can I solve it?

    Lorenzo Giraudi -

    I need motherboard for Acer one 10 s1001

    Abdul Majeed Hajam -

  3. jDfPLiOCkgrhZfyS
    jDfPLiOCkgrhZfyS
    Ufd2rQg2V1Hmwdoc
    1deBXrvFKXTyY1eC

    • Peel off all of the Polyimide tape (yellow tape).

    • Remove the metallic tape covering the keyboard connection.

  4. UQeYNWjJ2RN2pxPX
    UQeYNWjJ2RN2pxPX
    QeLYrSMUHVOYGVDK

    • Unscrew the two 3.5mm Phillips #0 screws and open the ZIF latch.

    • Gently remove the silver part covering the battery and set it aside.

  5. gcfTVqIJKYOHIcGy
    gcfTVqIJKYOHIcGy
    WatxDiuRkpjL2ZTQ
    AZZD2V5cBgVFxg1M

  6. xSB4Lu3RAZXZPLqD
    xSB4Lu3RAZXZPLqD
    R3dDjJ6pQQ45GffR

    • Remove the four 4mm screws at the corners of the motherboard with the Phillips#0 bit screw.

    • The screw beneath the metallic tape also needs to be removed.

  7. JyD5JnQpbJCpCedD
    JyD5JnQpbJCpCedD
    4VFPoufptdpalpGk
    EtMBfWFTKFNbBZte

    • Disconnect the three cables on the motherboard closest to the battery.

    • These cables require some extra prying power to be removed.

  8. NKEZVWHSDL2YBybs

    • Slide out the motherboard and put it aside.

  9. A4dODVDPGvOtp4hG
    A4dODVDPGvOtp4hG
    l2xpYjJ6UKbPwAnD
    rD2TDDsBVmiDqkMO

    • Use the plastic opening tool to separate the glue that holds the battery to the screen.

    • Avoid putting pressure on the glass while separating the battery from the screen.

    • Remove the battery and set it aside.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Shannon Griffin

Mitglied seit: 03/10/16

1339 Reputation

2 Kommentare

Thankyou for this information. I am replacing a battery on my own, and your tutorial is extremely clear and helpful.

shop_arod -

I want a ..

Motherboard

4D Guru Channel -