Einleitung

If your Acer Spin 5 SP515-51GN-807G laptop is failing to power on or you are experiencing symptoms of an old battery such as faster than normal discharge, use this guide to replace the battery.

It is important to have a healthy, functioning battery to ensure your laptop runs efficiently. If you notice after a long period of time that your laptop battery is draining faster than normal, you may want to consider replacing the battery.

When replacing a battery it is important to take several precautions. Make sure to avoid puncturing the battery, as that can cause a fire. Also, make sure to take appropriate precautions with a swollen battery. Always remember to power down the device before beginning replacement.

After replacement, please make sure to follow proper procedures when disposing of the battery.

  1. 2NhMUJrFdT5D4S1n
    • Remove the eleven 6.5 mm screws that secure the back case using a Phillips #1 screwdriver.

  2. pxKWyoOMwCjcSERk
    pxKWyoOMwCjcSERk
    UtREdKtO2NsLOFLN
    BRWSnRTNhw24rcCe
    • Use a plastic opening tool to gently pry open the back cover.

  3. IiVeqVpZAapugxvH
    • Gently remove the back cover from the device.

  4. oLFuuGujkFDetbpD
    oLFuuGujkFDetbpD
    Jp2cgIxlVrU4OUhZ
    lGLDCUFw2dHyII51
    • Using tweezers, remove the piece of black tape over the battery cable connector.

  5. K3TS3BUWDwoednur
    K3TS3BUWDwoednur
    4xJ1TwerPG3CI2sB
    ipEPC2nmZFe5ZK1Q
    • Remove the piece of black tape that covers the battery.

  6. fxyWTUsMOH4TQ4p4
    fxyWTUsMOH4TQ4p4
    AwXZurd5hqjSjQSu
    • Grip the battery cable on both sides with your fingertips and gently pull it away from the port.

    • If needed, use the plastic opening tool to remove the cord from its port.

    Great work with clear, specific directions here and a nice flipbook shot. This step would be easy to follow.

    Alex Watkins -

  7. 3c3AEhCpPvXUcLe5
    3c3AEhCpPvXUcLe5
    IxD6AAyhogWIRgiS
    QXXrsq3EBhjDGTRv
    • Remove the two 3.5 mm screws that secure the battery using a Phillips #00 screwdriver (PH00 bit).

  8. 3WlLVqNdexXkqXpV
    3WlLVqNdexXkqXpV
    OxWpPL4v1WRuCsnq
    • Carefully place your fingers under the plastic lip where the screws were removed.

    • Lift upwards to remove the battery.

    • Do not bend or puncture the lithium ion battery as it poses a fire hazard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

James Wasielewski

Mitglied seit: 24/01/20

1030 Reputation

0 Kommentare