Einleitung

If your Acer Swift 3 laptop (model N20C12) speakers are no longer sounding pristine, but are sounding muffled or disoriented, use this guide to replace the two internal speakers.

It is important to look review the troubleshoot page to ensure replacing the speakers is the only solution for saving the quality of sound. It could be a settings issue, so be sure it is reset before proceeding.

Step 10 requires you to remove a small plastic piece that connects into the motherboard of the computer. It is essential to be extremely careful while handling that piece because it can be easily damaged from removing it at an angle.

  1. U6pFcVvydOOIY5nA
    • Be sure to power off the laptop before starting.

    • Flip the device over so the bottom panel is facing up.

  2. TFBXJ1e1DKKTqSXM
    TFBXJ1e1DKKTqSXM
    RkAMOyJCquMjZk6I
    • Remove the eleven 5 mm screws from the back of the device using a TR6 Torx screwdriver.

  3. tDWEsqN2Sy6gyImV
    • Use the iFixit opening tool to pry open the back of the device.

    • Remove the bottom cover from the laptop.

  4. voEGFQGk1XT2IGGG
    voEGFQGk1XT2IGGG
    H1OyWgsxjAR4QdIY
    JUBqoRYyfmY6SEms
    • Peel back the strip of black tape.

  5. BQKZ1nb63RRroTUT
    BQKZ1nb63RRroTUT
    K3rRECZtBUiL6xlY
    • Unplug the group of wires by pulling the white plastic piece towards yourself.

    • Be careful, this piece can be easily damaged.

  6. 5OQ46EUnXTkSgbDj
    5OQ46EUnXTkSgbDj
    jbfRTI5AOFQAqami
    • With the iFixit opening tool or your nail, gently lift the speaker up near the bottom attachment site.

  7. OSFDYpcccphiHFTG
    • Pinch the end of the speaker to gently slide the the other end out towards you while still being attached to the white plastic piece.

  8. WcTOuMCAJLH5ZyAY
    WcTOuMCAJLH5ZyAY
    XPs5mSlER56J1cGO
    • Remove tape overlaying the wires.

  9. Vfd3udSF4KORBwoy
    Vfd3udSF4KORBwoy
    ltb52N21QGlb1sZ3
    • With your two fingernails, place them on both sides of the upside-down "T" and pull towards yourself.

    • Be careful removing this piece; it can be damaged by removing it at a bad angle. Pull straight back.

  10. L5R6viUDdDFZUMMQ
    • Remove the speaker.

    • Repeat for the other side.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Anna Miller

Mitglied seit: 26/09/22

735 Reputation

0 Kommentare