AcuRite 02032 Base Replacement

Geschrieben von: Ben Kegel
  • Kommentare: 0
AcuRite 02032 Base Replacement

Schwierigkeitsgrad

Easy

Schritte

5

Zeitaufwand

5 Minuten

Einleitung

This guide will instruct how to open up the casing of the Acurite 02032 weather center. This guide is very simple to follow and only requires a screwdriver. A screwdriver with a longer extension is recommended to reach deep screws.

  1. ZNsNxWNdq2HbfSGU
    ZNsNxWNdq2HbfSGU
    vD6w2suZwYLiK5Xb
    TOoRScvG6KuJ452O

    • Remove the battery compartment lid by lifting upward.

  2. aZgwxARfltbU1Wi5

    • Pull the ribbon to eject the 2 X AA alkaline batteries.

  3. kMdJwaJucelbVtCZ
    kMdJwaJucelbVtCZ
    WQCjbNKgIIUdYKBV
    3wdIOHru2uJ2feMX

    • Once the batteries are removed, it is safe to proceed.

  4. yUEWAYaGA6wbRZ2d

    • Remove the four 0.8cm screws that attach the bottom panel to the device

    • An extended driver is needed to reach 3 of these screws. If you are using the 64 - bit driver kit you can extend the driver by inserting the driver PH1, (Phillips size 1) into the size 4 hexagonal adapter.

  5. OB4JBpvydr3frJef
    OB4JBpvydr3frJef
    OUIHndUIQutdsvoF

    • Gently lift the top section of the weather center away from the base. With all the screws removed it should lift off easily.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Ben Kegel

Mitglied seit: 15/09/16

350 Reputation

0 Kommentare