Alcatel Jitterbug Smart Battery Replacement

Geschrieben von: Gavin Le
  • Kommentare: 3
Alcatel Jitterbug Smart Battery Replacement

Schwierigkeitsgrad

Moderate

Schritte

4

Zeitaufwand

5 - 10 Minuten

Einleitung

A very easy guide showing you how to replace the Battery on this phone due to Faulty Battery

  1. 5UE6HJCYuTTCfPKA
    5UE6HJCYuTTCfPKA
    NKxJPuXyiGiwF1eU

    • Pry back cover open with a medal spudger, or your fingernail, in the divot at the bottom left corner of the phone.

    • Lift open case by the corner nearest the divot and remove it from the phone.

  2. 6F6Xm5WMkZRHXY1X
    6F6Xm5WMkZRHXY1X
    6IZAcxkxA4EhrnPU
    Cd4dIqMhDWWpvsrx

    • Remove 13 1mm JIS screws with JIS #000 Screwdriver.

  3. oDKZDLKkPEUEHolu
    oDKZDLKkPEUEHolu
    rrpcYCn2cfevYx2I

    • Gently pry off the Mid frame from the phone using a Metal Spudger.

  4. TpXmjMYwwPnwjTve
    TpXmjMYwwPnwjTve
    XHGFi2vumHtArDEn

    • Use a pair of tweezers to pull the battery connector from its port.

    • Be careful not to tear the battery from its connection.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Gavin Le

Mitglied seit: 13/02/18

496 Reputation

3 Kommentare

After reading my user guide, I searched how to replace a battery on a Jitterbug Smart2 and had several hits. I connected with this one: Alcatel Jitterbug Smart Battery Replacement 104708#. I see this is the site you have, so I began to follow instructions. When I took the back off of my phone, I saw it looks different from the one you show. Also, mine says this is a non-removeable battery. What do I do now?

Shirley Anderson -

I just called Great Call. They told me the battery is not replaceable. I’ll risk it anyway: What’s the point of a cordless phone that doesn’t work without a cord?

Robert L Lazzara -

I followed your directions step by step to remove the battery but on my Jitterbug Smart I, there are only 12 screws instead of 13! Your photo shows a screw in the middle near the camera lens but on my phone, that screw does not exist and the word void is printed in it’s place where the screw would be. Because of this, I was unable to remove the mid frame to get access to the battery. It seems to be stuck where the lens is situated making it impossible to remove and I don’t want to break it off.

Ed Johnston -