Einleitung

If you hard drive corrupts or you would like to add more storage to your Alienware 15 R2, follow this guide. When working with computers, always make sure to unplug your computer and ground yourself before reaching inner components so you don’t accidentally release an electrical charge into the sensitive technology. The discharge could potentially damage your computer’s internals.

  1. nDRBODZRJSBpaYO1
    nDRBODZRJSBpaYO1
    uZ3vfRtWpRkRW34P
    gst4ZBtWDZSNUIN3
    • Place laptop upside down with the hinge facing you, then remove the two 9.0 mm Phillips #0 screws located in the center of the rear panel.

    • Remove the rear panel by using the iFixit opening tool to separate it from the back of the laptop.

    • Be sure to use your Anti-Static wrist strap for this process. Hard drives are susceptible to static damage!

  2. HDTKAmPqCpXRYWXf
    HDTKAmPqCpXRYWXf
    bdJWAthAUVrCmGPm
    • Use the iFixit opening tool to disconnect the battery cable.

  3. c5q6XUAKAy5iGrlB
    c5q6XUAKAy5iGrlB
    rhCXCjourPoDT2yg
    • Use the T9 Torx bit to remove the screws on the hard drive cover.

  4. j36gN1PywVM3KeLu
    j36gN1PywVM3KeLu
    DHKyvmNEmhAwguTR
    • Firmly pull on the plastic tab to remove connector from motherboard and remove the hard drive from it's slot.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Jarid Williams

Mitglied seit: 18/09/19

208 Reputation

0 Kommentare