Einleitung
This guide will show you how to replace the hard disk drive (HDD) for your Alienware 17 R4.
Ersatzteile
-
-
Use a PH1 screwdriver bit to remove the six M2.5x13 screws (2.4 mm) on the back of the laptop.
-
Use a PH1 screwdriver bit to loosen the one M2x3 screw (1.9 mm).
-
-
-
Pull the base cover up to remove it.
-
If you are having trouble, insert a plastic opening tool into the divots along the laptop's edges to loosen.
-
-
-
Disconnect the battery connector cable, located on the right side of the laptop, above the hard disk drive.
-
-
-
Use a PH1 screwdriver bit to remove the four M2.5x5 screws (2.4 mm) on the hard disk drive.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.
