Alienware M15x Hard-Drive Replacement

Geschrieben von: Terrence15
  • Kommentare: 0
Alienware M15x Hard-Drive Replacement

Schwierigkeitsgrad

Easy

Schritte

15

Zeitaufwand

10 - 25 Minuten

Einleitung

In this guide, we will show you how to remove and replace the Hard-Drive.

  1. XIQIj1kvSxPCqaZx

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • Turn the computer over.

  2. raExf1jfrPIQ3tPi

    • Slide the battery latch to the unlock position as shown.

  3. AyutB62CN52SMJ2d

    • After the Battery Pack pops up, remove the Battery Pack.

  4. XMUESkW5Ei6RcjE1

    • Align the battery pack tabs with the slots in the battery bay.

  5. 4XhgsGSYPIpbXCgD

    • Push the NEW battery pack into the battery bay until the battery pack clicks into place.

  6. eLs6dLXcroHF1Iru

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • WARNING: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.

    • Loosen the four captive screws that secure the hard-drive assembly.

  7. dHabVlwiHuyaMGaj

    • Using the pull-tab, lift the hard-drive assembly out of the hard-drive bay.

  8. gICiMe3SXDqAwueS

    • Remove the four screws that secure the hard drive to the hard-drive bracket.

  9. xjqcSkxAmCImQti1
    xjqcSkxAmCImQti1
    xvmUNakhZrWtpxLw

    • Lift the hard drive out of the hard-drive bracket.

  10. Jo5jjvXWDaOQS1IX
    Jo5jjvXWDaOQS1IX
    3smkYBkLqGEb6JrD

    • Disconnect the interposer from the hard drive.

  11. meEhTueZOw6vkDgV
    meEhTueZOw6vkDgV
    vleAnO3r1XL3HuQX

    • Connect the interposer to the NEW hard drive.

  12. VANQUSiBkwxVLXdi
    VANQUSiBkwxVLXdi
    FQlbHJZstXPCAu1A

    • Place the hard drive in the hard-drive bracket.

  13. 4QKCiQsXAUelAMAP

    • Replace the four screws that secure the hard drive to the hard-drive bracket.

  14. eAGRG1TrQScXhOJ3

    • Place the hard-drive assembly in the hard-drive bay.

  15. hyRopGWGhGTYbFRs

    • Align and tighten the four captive screws that secure the hard-drive assembly to the hard-drive bay.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Terrence15

Mitglied seit: 18/12/17

78652 Reputation

0 Kommentare