Alienware M15x Memory Modules Replacement

Geschrieben von: Terrence15
  • Kommentare: 0
Alienware M15x Memory Modules Replacement

Schwierigkeitsgrad

Easy

Schritte

13

Zeitaufwand

15 - 30 Minuten

Einleitung

In this guide, we will show you how to remove and replace the Memory Modules.

  1. XIQIj1kvSxPCqaZx

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • Turn the computer over.

  2. raExf1jfrPIQ3tPi

    • Slide the battery latch to the unlock position as shown.

  3. AyutB62CN52SMJ2d

    • After the Battery Pack pops up, remove the Battery Pack.

  4. XMUESkW5Ei6RcjE1

    • Align the battery pack tabs with the slots in the battery bay.

  5. 4XhgsGSYPIpbXCgD

    • Push the NEW battery pack into the battery bay until the battery pack clicks into place.

  6. lnEOSXeRIoLaBijK

    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

    • Loosen the two captive screws that secure the memory-module door to the computer base.

  7. HhfODQu4KXqrwusq
    HhfODQu4KXqrwusq
    cpDpgJMYDXoAfHtI

    • Slide the memory-module door to release the tabs and lift the memory-module door out of the computer base.

  8. th3pRVtNMpKfUntx
    th3pRVtNMpKfUntx
    J4wZnNBdDekwUfAd

    • CAUTION: If you need to remove memory modules from both connectors, remove the memory module in the upper connector before you remove the module in the lower connector.

    • CAUTION: To prevent damage to the memory module connector(s), do not use tools to spread the memory module spring-locks.

    • Use your fingertips to carefully spread apart the spring-locks on the memory-module connector until the memory module pops up.

  9. 6ltO1LcHMLGGGPGW

    • Remove the memory module.

  10. 2ERWCG6DUEqIMdZP
    2ERWCG6DUEqIMdZP
    Kt1FbglxmdDH2hpd
    KrOMA4imO44YSBmm

    • Align the notch on the NEW memory module with the tab on the memory-module connector.

  11. 2pGOtyNVAMFrhGNX
    2pGOtyNVAMFrhGNX
    kpa1YooOOHYHTuhS

    • Insert the module into the memory-module connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear the click, remove the module and reinstall it.

  12. hUSDITfvc15eUPjY
    hUSDITfvc15eUPjY
    hFFo4UCvVRNm4U4Q

    • CAUTION: If the memory-module door is difficult to close, remove the memory module and reinstall it. Forcing the memory-module door to close may damage your computer.

    • NOTE: If the memory module is not installed properly, the computer may not boot.

    • Align and insert the memory-module door tabs into the slots on the computer base.

  13. 2n3XKICSfjHyBnwK

    • Replace and tighten the two captive screws that secure the memory-module door to the computer base.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Terrence15

Mitglied seit: 18/12/17

78652 Reputation

0 Kommentare