Alienware M17x P01E Center Control Cover Replacement

Geschrieben von: Grant Dolmat
  • Kommentare: 0
Alienware M17x P01E Center Control Cover Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

7 - 10 Minuten

Einleitung

Use this guide to remove the central control cover to access the keyboard and graphics card.

  1. QL3VNEJDU4TMEJ5L

    • Please power off the computer and deplete the battery before attempting the following step.

  2. KQUSuOGG6tKXmqvi
    KQUSuOGG6tKXmqvi
    4QNIwFPD4iXCHvaq

    • Press down on the battery latch and slide it to the left.

    • Lift the battery out once it pops out.

  3. ZAiuFh4ll6YVUZOn

    • Loosen the two silver Phillips #1 screws.

    • The screws are held to the compartment door by a washer and cannot be removed.

  4. T2MZfN1STu1rc2Zg
    T2MZfN1STu1rc2Zg
    AsZqdToaVrj4wiID

    • Use your hand to gently lift and remove the compartment door.

  5. MWTTVco6JFxIbZeF
    MWTTVco6JFxIbZeF
    EP5HeBMXy2YcSkEg
    jry4OEKuuAOxPxJX

    • Remove the two 2mm Phillips #0 screws from the recesses on the left and right side of the processor fan.

  6. ww6dm41Ra5vuOnYL
    ww6dm41Ra5vuOnYL
    2KkQRXPntpTZsXFE

    • Turn the laptop top side up and fully open the display.

    • The center control panel is between the display and the keyboard. Fully opening the display ensures that there is enough room to pry and lift the center control panel.

    • Pry the center control panel up from its left and right edges with the Spudger.

    • The center control panel may require a decent amount of force to pry free. Do not immediately lift the panel from the laptop once it has been pried free. A cable is connected from the laptop to the center control panel.

  7. VL4JsDobBEJrDa2s
    VL4JsDobBEJrDa2s
    YJFRZtYSP2BnvXqg

    • Lift the center control panel from the laptop.

    • Tilt the center control panel away from the display carefully.

    • Lift the latch open to remove the cable connecting from the laptop to the center control panel.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Grant Dolmat

Mitglied seit: 17/09/18

328 Reputation

0 Kommentare