Alpine MRV-M500 Circuit Board Replacement

Geschrieben von: Eric Gaulke
  • Kommentare: 0
Alpine MRV-M500 Circuit Board Replacement

Schwierigkeitsgrad

Moderate

Schritte

3

Zeitaufwand

20 Minuten

Einleitung

The circuit board in the MRV-M500 contains all the electrical components necessary to the amplifier's function. A number of issues could cause a circuit board to malfunction and require replacement. To replace the circuit board, you will need a small Phillips screwdriver and a replacement circuit board.

  1. 6OACyRZrED4KJjWm
    6OACyRZrED4KJjWm
    aFu4pQCcJBvNFj3J
    AHXxKylVWiYfQwSq

    • Remove all the Phillips 10.0mm and 7.0mm screws on the outside of the case.

  2. EjEQd2tvmkZDknpI
    EjEQd2tvmkZDknpI
    IVFdSEtpOJyGCSMu

    • Remove all Phillips 7.5mm, 12.5mm, and 10.5mm screws holding the circuit board to the case.

    • Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.

  3. w4yQQNn61A3GWZXP

    • Remove the circuit board from the case.

Abschluss

To reassemble your device, follow these instructions in reverse order using the replacement circuit board.

Tinte & Feder

Eric Gaulke

Mitglied seit: 17/09/18

623 Reputation

0 Kommentare