Altec Lansing BoomJacket 2 Disassembly

Geschrieben von: Zach Braaten
  • Kommentare: 0
Altec Lansing BoomJacket 2 Disassembly

Schwierigkeitsgrad

Moderate

Schritte

6

Zeitaufwand

5 - 15 Minuten

Einleitung

After completing this guide you will be ready to repair or replace any of the components inside your device.

  1. mkKeMZBPyyOj5caw
    mkKeMZBPyyOj5caw
    KShnAhTUHeR5VcZ5

    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

  2. 2RpSAkFCHP6CBUsq
    2RpSAkFCHP6CBUsq
    SHCxafgohvi2tHUJ

    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

  3. V1i3TqoLARI5Zlbm

    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

  4. o15FjqMcEQ24B4EM
    o15FjqMcEQ24B4EM
    Beu2KLPhGt5hpEoY

    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

  5. HuEAOOWEkeusjig3

    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

  6. Zk1btJ1d2PQacye5

    • Gently pull apart the front panel from the base of the speaker.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Zach Braaten

Mitglied seit: 12/07/18

516 Reputation

0 Kommentare