Altec Lansing BoomJacket Speaker Replacement

Geschrieben von: Ryan Byrnes
  • Kommentare: 2
Altec Lansing BoomJacket Speaker Replacement

Schwierigkeitsgrad

Moderate

Schritte

8

Zeitaufwand

10 - 20 Minuten

Einleitung

Are your speakers not producing the same amount of BOOM that they used to? Perhaps repairing your speakers is the way to go.

  1. Dww1lNNcSnKEfaOA

    • Using your hands, remove the pegs (4+4) from the front and back of the speaker.

  2. EZcPhuWsTvSIukDF

    • Remove the outer black rubber housing of the speaker.

  3. BCe2JsHYDSeAVofm

    • Remove the inner blue rubber housing from the speaker.

  4. TaMsC2UOaok51QSD

    • Pull out the two black wire meshes using a metal spudger.

    • Be careful not to damage the metal casing.

  5. RFexdyWNTAlBNH2Z
    RFexdyWNTAlBNH2Z
    mGMNuJAc5kH1dDAI

    • Using tweezers remove the rubber stoppers (4 at the back + 2 at the front).

  6. SSqXdmE4QXZNPN2C

    • Using the size PH1 screwdriver remove the screws (4 around each speaker).

  7. Zr1WZWFvIZTxpSGG

    • Pull the case apart and you will be able to see all the components inside the speaker.

  8. QxXmuUkDnmRtftDw

    • Remove the speakers (not entirely because of the wiring) by gently pulling each speaker up.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Ryan Byrnes

Mitglied seit: 12/04/17

848 Reputation

2 Kommentare

Where do I find the correct part to replace the charging port on my boom jacket?

Rockstar -

1.1" External Magnetic Type Round Slim Plastic Shell Speaker 8 Ohm 0.25W 2 Pcs

Eeshton -