AmazonBasics B00Q3KFX8U Drive Gear Replacement

Geschrieben von: William Foley
  • Kommentare: 2
AmazonBasics B00Q3KFX8U Drive Gear Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

2 - 6 Minuten

Einleitung

This repair would be necessary if the plastic drive gears within the AmazonBasics stripped, meaning the teeth were either ground down or broke off. A telltale sign of this is if you can hear the motor spinning, but the shredding blades do not move.

  1. CgBQPFT1ly3P2LWc

    • Remove the shredder assembly from the paper scrap bin.

  2. J3JBMEvj2RPWtGjG

    • Remove the two 10mm PH1 screws holding the small black panel in place.

  3. GDni5mYDFtplRnHd
    GDni5mYDFtplRnHd
    TKQTFC2PpYAA6amX

    • Remove the six 14mm PH1 screws holding the bottom cover in place.

    • Remove the cover by lifting straight upwards.

    • One of the screws will be hidden beneath a warranty sticker. Simply push the head of the screwdriver through the sticker to access the screw.

  4. 66Iib4FKnOXwGejR

    • Remove the blade/motor assembly from the top cover by lifting straight upwards. Do not disconnect any wiring just yet.

    • The blades are sharp. Coming into contact with them may result in injury.

  5. VFwUHshQeUYqMyYC
    VFwUHshQeUYqMyYC
    chpdhgIspBgYHXkC

    • Remove the five 8mm PH2 screws from the bracket holding the gears in place.

  6. YCwvV1HEFUR5aQdW

    • Use a metal spudger to pry the bracket from the main shredder assembly.

    • If the bracket is attached too tightly for the spudger, carefully use a metal screwdriver to pry it loose.

  7. adLFbV6rJjeoyTJy
    adLFbV6rJjeoyTJy
    NOSW4cu1cKhVPxJA

    • Remove the two plastic drive gears from the shredder assembly by lifting straight upwards.

    Where can we buy the replacement gears?

    jimmyecgewin -

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

William Foley

Mitglied seit: 25/03/16

548 Reputation

Ein Kommentar

Where does one buy these gear parts?

opticdreams -