Einleitung

  1. JkA2VGpvuBLI6fSn
    JkA2VGpvuBLI6fSn
    UO1XwAHAEtjSM5RF
    • Insert a spudger between the front panel and the body of the speaker.

    • Pry around the edges of the front panel with the spudger to pry it away from the speaker body.

  2. WkAMsYqjEQ1qFEfC
    WkAMsYqjEQ1qFEfC
    DRkDFxkcMPlRcYsR
    Q5C5rNiJYCUFAGOK
    • Remove eight 10 mm screws from the speaker mount using a Phillips #0 screwdriver.

    • Insert a spudger in the gap between the speaker mount and speaker body to remove the speaker mount.

    • Use your hand to remove the speakers.

  3. rAkkXyGhGRlJuKtc
    rAkkXyGhGRlJuKtc
    SOwDcSN2qTeOG6DA
    pCVUAwLpgyGOR442
    • Remove the 10 mm screw that is holding the motherboard in place using a Phillips #0 screwdriver.

    • Flip up the motherboard and disconnect the cord that connects the motherboard and the battery.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Mitglied seit: 12/11/14

71827 Reputation

2 Kommentare

Where can I buy the C34 and ESD4?

Abel Omeokwe -

Hello.

Do you know where to fond an Anker motherboard please?

Thanks

ckridene -