Einleitung
If your driver is malfunctioning or broken, this guide will show you how to replace your Apple IIc floppy Drive.
Werkzeuge
-
-
Slide the case toward the ports on the back, then grip under the catch and pull up while moving toward the ports to remove.
-
-
-
Tilt the keyboard up while detaching the ribbon connection by pulling it straight up. You may have to wiggle the connector sideways to loosen it.
-
-
-
Carefully place device upside down to remove the four centered 21.1 mm screws that secure the floppy drive.
-
-
-
Unscrew the four 8.5 mm screws that attach the floppy drive cage. Two screws are located on the front and back of the cage.
-
Abschluss
To reassemble your device, follow these instructions in reverse order.