Archos Jukebox Recorder 20 Hard Drive Replacement

Geschrieben von: Aidan Patterson
  • Kommentare: 0
Archos Jukebox Recorder 20 Hard Drive Replacement

Schwierigkeitsgrad

Moderate

Schritte

7

Zeitaufwand

5 Minuten

Einleitung

In this guide the user will learn how to disassemble an Archos Jukebox Recorder 20 in addition to learning how to replace the hard drive.

  1. MSt2BjKMcqKMPfeV

    • Remove the plastic cover over the batteries on both sides of the device.

  2. fhGouFPlIOyxdP1Q

    • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

  3. u6YAKZ1lne1k1u4y
    u6YAKZ1lne1k1u4y
    DE5OSGvSOfLH3EJG

    • Use the T10 Torx Screwdriver to remove the 2 torx screws on each side of the device.

    • Two on each side for a total of four.

  4. HiYtlpuj1BIp3hUg
    HiYtlpuj1BIp3hUg
    FEdEj1HJZsiNv5pZ

    • Remove the 2 screws on the top and the 2 screws on the bottom of the device using a Phillips #0 screwdriver.

  5. 2idxwKDUMOyRLCLV

    • Remove the outer metal casing of the device by popping it off with a plastic opening tool.

  6. Humk1eMfPCyaZaXH

    • Remove the rubber bumpers on all four corners of the device.

  7. U3ufx1uqXSEuyXH1
    U3ufx1uqXSEuyXH1
    cC4qOmlAKLCxHiBZ

    • Lift the hard drive out of its casing with the help of a plastic opening tool and slide it out. This will disconnect the pins connecting the drive to the rest of the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Tinte & Feder

Aidan Patterson

Mitglied seit: 08/01/18

315 Reputation

0 Kommentare