Einleitung
Through this guide you will be shown how to disassemble the headset listed above and replace the motherboard, saving your headset and saving you the cost of replacement of the whole product.
A sign as to if the replacement is necessary is a background hissing sound or an overall change in quality of the onboard audio.
Ersatzteile
-
-
Use your hand to firmly grasp the cushion and remove it from the speaker.
-
Repeat the process for the other side if needed.
-
-
-
Slide the plastic spudger beneath the dust cover of the speaker.
-
Lift the dust cover up with the plastic spudger.
-
Using your fingers, completely remove the dust cover from the speaker.
-
-
-
Remove four 5 mm screws from the speaker protector using a JIS #1 screwdriver.
-
Use your hands to remove the speaker protector.
-
-
-
Remove the two 2 mm long screws securing the motherboard using a Phillips #000 screwdriver.
-
-
-
Use your fingers to hold the wire located by the covered part and gently lift it out of its cradle.
-
Carefully use your fingers to disconnect the colored wires connected to the motherboard.
-
To reassemble your device, first ensure the new replacement motherboard has been installed (by going through the directions in reverse), and then by retracing the steps backwards. This will ensure that your headset will be properly reassembled.
