Einleitung

  1. vmQpArO1uM2EbMO1
    vmQpArO1uM2EbMO1
    6cckmFB3bRfBoGGK
    • Place the laptop face down with the battery facing away from you.

    • Locate the two buttons next to the battery.

    • Slide the right slider to the unlocked (red) position.

  2. ZZWqcVfj6l1AMltt
    ZZWqcVfj6l1AMltt
    TiJTpB1YyREPOYBC
    • Hold the left button to the left.

    • Slide the battery with your other hand away from you and it should disconnect.

  3. 1lpuEPnnF1NXZHag
    1lpuEPnnF1NXZHag
    DA1XISPlNEohVl3F
    L5CfIBWCJAZimYcV
    • Remove the five Phillips # 0 screws from the back panel.

    • Using your finger or a plastic spudger start to carefully pry up the back planel.

  4. GakFPyJxivmrGZIV
    GakFPyJxivmrGZIV
    YJ6FGOR3t1Xiaduj
    • Slide the back panel away and remove the panel.

  5. 4GFswGr3K6BnrjN5
    4GFswGr3K6BnrjN5
    F1ENoWlLNsCfDHbW
    • Removal of cooling system will void your warranty. Proceed with caution.

  6. nOwcBnTtpjAUjcR1
    nOwcBnTtpjAUjcR1
    NvtCfRJQDj1Ax1gr
    • Using a Phillips #0 screwdriver, remove all six screws from the cooling system.

    • Unplug the fan power connector.

  7. 2XONxZEq1NPTwMvm
    2XONxZEq1NPTwMvm
    FUKufRPT3bLvPeoq
    • Carefully grab the copper pipe and start to lift upward.

    • Lift to the angle shown and then start to slide it out.

  8. mGH216MdE3rNVlvB
    • Clean the designated area with isopropyl alcohol on a microfiber cloth

    • Replace with new thermal paste if needed

Abschluss

To reassemble your device, follow these instructions in reverse order.

Bradley Varnum

Mitglied seit: 09/03/17

276 Reputation

0 Kommentare